CNM Brand YDC Series of Hollow Plunger Central Hole Jack For Exporting

No. 1: CNM Brand YDC1100( 110 Tons) Hollow Plunger Central Hole Post Tension Jack Were Exported to Kuwait, this is their second order for post tension materials and equipment.

1.Model: YDC1100(110 Tons) Hollow Plunger Central Hole Jack
2. Technical Data for YDC1100(110 Tons) Hollow Plunger Central Hole Jack: Capacity: 1500 kn, stroke: 150 tons, rated oil pressure: 52 Mpa, Jack Cylinder Tensioning Area：21254 mm², Jack Central Hole Diameter：80 mm, Weight: 66 kg, Over Dimensions: 230*332 mm.
3. Capacities(load):We have jacks of 650kn, 1000kn, 1500kn, 2000kn, 2500kn, 3000kn, 4000kn, 4500kn, 5000kn, 6500kn, 7500kn, 8000kn, 8500kn, 9000kn, 10000kn, 12000kn or more larger).
4. Matched Oil Pump:50 Mpa, 63 Mpa Electric Oil Pump
5. Application:Bridges, high buildings, coal mine , railway and subway, water conservancy and hydropower engineering.

6. Features:It can tension the followings PC Strand and Stel Rebar
1):It can tension standard pc strand diameter 12.7mm, 15.24mm, 15.7mm, 16mm pc strand.
2):It can tension non-standard pc strands diameter 8.0mm, 9.52mmn, 10.8mm, 12.9mm.17.8, 21.6, 21.8mm, ect.
3):It also can tension 16mm, 22mm, 24mm, 26mm, 28mm, 32mm, steel rebar
7. Warranty Time:One Year, we will send you Repair Kits if you need any time.

8. Our Advantages:We are PT Manufacturer from China, our full products range for post tensioning and pre-strssing construction:
1).Materials:Pc strand, YJM anchor system(monostrand anchor, multistrands anchor), ducts(metal ducts, HDPE plastic ducts)
2).Equipment:Hydraulic Jack(QYC mono jack, YDC multi-strand tensioning jack), electric oil pump, YH30 embossing machie(onion jack), GYJ500 extrusion machine, ZG130 ducts making machine, grouting pump and mixer for post tensioning).
3).Bridge Equipment:Bridge Crane, Bridge Girder Launching Machine, Bridge Girder Transporting Vehicle, etc.
No. 2: The YDC8000(800 Tons) Hollow Plunger Central Hole Jack and Stressed Pump that Exported to USA.

9. About Our Company: Henan Prestressing Equipment Co., Limited is a PT Manufacturer from China, our full products range for post tensioning and pre-strssing construction:
1. Materials: pc strand, YJM anchor system(monostrand anchor, multistrands anchor), ducts(metal ducts, HDPE plastic ducts)
2. Equipment: Hydraulic Jack(QYC mono jack, YDC multi-strand tensioning jack), electric oil pump, YH30 embossing machie(onion jack), GYJ500 extrusion machine, ZG130 ducts making machine, grouting pump and mixer for post tensioning), Intelligent Tension System Equipment.

If you have any interest please do not hesitate to contact with me.Jason WangSales ManagerHenan Prestressing Equipment Co., LimitedSkype : jason.wang569Email Address: sales@pt-concrete.comMobile ＆ Whattsapp(Viber) No.: +8613673713569Tel: +86-0371-63228879, Fax: +86-0371-63228879