Prestressed Concrete (Post Tensioning Concrete): Post Tension Anchor, Multi Strands Anchor, Prestressed Concrete Anchor for Prestressing Bridges and Buildings

Post Tension Anchor, Multi Strands Anchor, Prestressed Concrete Anchor for Prestressing Bridges and Buildings

1. INTRODUCTION:

Multistrands anchor system are composed of anchor block(anchor head), wedges, anchor bearing plate, spiral reinforcing rings. It can used to lock the steel strand wires on/under classes of 2000Mpa standard strength,which is usually in diameters of 12.7mm /12.9mm/15.2mm/15.7mm.

It has been verified by pratice that various type of YJM anchor also can be used for the different kinds of strand wires produced according to ASTM/BS/JIS/JIG/AS and other international standards respectively only if its technical parameters shall mary the related detail materials.

2. BRIEF DESCRIPTIONS:

1). Type: Single-hole, Multi-hole; Circular, Flat.

2). Parts: Anchor Ring/Plate, Wedge, Base Plate etc.

3). Have a high anchor efficiency and very good performance.

4). We can manufacture all kinds of anchorage and prestressed equipment according to your requirement and drawings.

3. APPLICATIONS:

1). For Buildings: Housing, Commercial Buldings, High Rise Buildings.

2). For Municipal Engineering: Railway, Highway, Over Head Fast Speed Way, Metro Way, High-speed Railway, etc.

3). For Projects: Mining, Piling, Foundation, Slope and Rock Reinforcement, Hydropower Station, Anchoring Engineers, Water Conservancy Project, Oil or Gas Tank, etc.

4. FEATURES:

YJM anchorage system is consists of Stresed End Anchor System(Including Stressed End Anchor Head/ Blocks, Anchor Wedges, Anchor Bearing Plate, Spiral Steel Reinforcing Rings) and Dead End(Fixing End) Anchor System(including Dead end anchor, Anchor Wedges, Steel Plate, Spiral Steel Reinforcing Rings). It is widely used in Prestressing and Post Tensioning construction.

YJM series of anchor system is work with 5mm to 10mm pc steel wire and 12.7mm, 15.24mm pc strand cable. The detail specifications see as followings:

1). YJM5 applies to 5mm, 5.2mm smooth surfase and spiral ribbed pc steel wire.

2). YJM6 applies to 6mm smooth surfase and spiral ribbed pc steel wire.

3).YJM7 applies to 7mm smooth surfase and spiral ribbed pc steel wire.

4).YJM8 applies to 6mm smooth surfase and spiral ribbed pc steel wire.

5).YJM9 applies to 9mm smooth surfase and spiral ribbed pc steel wire.

6).YJM10 applies to 10mm smooth surfase and spiral ribbed pc steel wire, and 9.3mm, 9.53mm pc strand.

7).YJM11 applies to 10.8mm and 11mm pc strand.

8). YJM13 applies to 12.7mm, 12.5mm & 12.9mm pc strand.

9). YJM15 applies to 15.2/15.24mm, 15.7mm pc strand.

10). YJM18 applies to 17.8mm pc strand.

11). YJM22 applies to 21.6/21.8mm pc strand.

5. OUR ADVANTAGES

Henan Prestressing Equipment Co.,Limited manufacture full complete post tension components, materials and post tension equipment for buildings and bridge construction. Kindly please call us: Mobile Phone. +8613673713569.

1. Anchor System: unbonded monostrand anchor system, multistrands anchor system, flat anchor system, arch type flat anchor, anchor barrel and wedges, ground anchor, rock and soil anchor, anchor wedges, anchor bearing plate, spiral reinforcing rings.

2. PC Strand System: unbonded pc strand, bonded pc strand, 12.7mm prestressed cable, 15.24mm prestressed strand, epoxy coated pc strand,galvanized pc strand, 6mm, 7mm, 9mm pc steel wire.

3. Duct System: galvanized metal duct, HDPE plastic duct, curved type galvanized metal duct, flat duct, corrugated pipe.

4. Prestressing Equipment: Monostrand Stressed Jack and Pump. Multi-strands Post Tension Jack and Pump, YH30 Onion Jack, Corrugated Duct Making Machine, Flat Duct Machine, GYJ500A Compression Fitting Machine, Grouting Pump and Mixer Machine, Intelligent Tension System.

5. Heavy equipment: bridge girder launching machine, drilling rig, bridge girder transporter

About Our Company:

Henan Prestressing Equipment Co., Ltd. which is located in beautiful city- Zhengzhou City, Henan Province, China. We are a professional PT Manufacturer which is engaged in the production of prestressed anchorages, wedges, anchorage coupler, pc strand, ducts and stressing equipment for post tenson and prestressing.

We have more than 500 worker, 35 engineers, and 15 production workshops which equiped many advanced production equipment and machine. Our main products include: PC Strand, Ducts, Steel Strip, YJM Multi-strand Anchor System: YJM Mono-strand Anchor System, BM Flat Anchor System, YDC Hydraulic Jack(Multi-strands Tensioning), YB Electric Oil Pump, YH30 Embossing Machine, GYJ500A Extrusion Machine, ZG Metal Ducts Making Machine, Grout Pump And Mixer, etc.

Our factory is established since from 1993 year(more than 23 years), we have helped the goverment and contractors ompleted many famous projects at home and abroad. Now we have exoprted our materials and equiupment to more than 35 countries. Hope we can cooperate with you. We will provide you best service, good quality and best price.